منافسة عامة قيد التنفيذ

توريد وتركيب لمشروع استبدال وترقية الموزعات الشبكية

جامعة الامام محمد بن سعود

رقم المنافسة

220639583850

المعرّف

#417767

رقم المنافسة

220639583850

رقم المنافسة الداخلي

43/56

الجهة الحكومية

جامعة الامام محمد بن سعود

الفرع / الإدارة

الادارة العامة للمشتريات والمنافسات

نوع المنافسة

منافسة عامة

حالة المنافسة

—

طريقة تقديم العروض

—

رسوم الاشتراك

500 ر.س

سعر كراسة الاشتراط

500 ر.س

تكلفة الدعوة

200 ر.س

تكلفة الشراء

500 ر.س

الضمان الإبتدائي

—

الضمان النهائي

—

مدة العقد

—

التأمين مطلوب

—

مدة الوقفة (أيام)

—

داخل المملكة

—

التاريخ	ميلادي	هجري
تاريخ النشر	2022/06/21 13:08	—
آخر موعد للاستفسارات	2022/07/21	1443-12-22
آخر موعد تقديم العروض	2022/07/28 09:00	1443-12-29
موعد فتح العروض	2022/07/28 10:00	1443-12-29
موعد فحص العروض	—	—
التاريخ المتوقع للترسية	—	—
تاريخ بدء الأعمال	—	—
تاريخ خطاب تأكيد المشاركة	—	—
بداية إرسال الأسئلة	—	—

موقع التنفيذ

منطقة التنفيذ

—

مدن التنفيذ

—

مجال التصنيف

يشمل مواد توريد

لا

جدول 1 المعدات والأجهزة - تقنية معلومات

البند	العدد	وصف البند	المواصفات	وحدة القياس	الرقم التسلسلي
1	25	موزع شبكة 24 منفذ (نوع 2)	- 24 UPOE 8 Multigigabit (100M/1G/2.5G/5G/10G) + 16x 10M/100M/1G - 4x 10G/1G fixed uplinks - Total number of MAC addresses 32,000 - Total number of IPv4 routes (ARP plus learned routes) 32,000 (24,000 direct routes and 8000 indirect routes) - IPv6 routing entries: 16,000 - Multicast routing scale: 8,000 - QoS scale entries: 5,120 - ACL scale entries: 5,120 - Packet buffer: 16 MB buffer for 24 and 48 port Gigabit Ethernet models - FNF entries: 64,000 flow on 24- and 48-port Gigabit Ethernet models - DRAM: 8 GB - Flash: 16 GB - VLAN IDs: 4094 - Total Switched Virtual Interfaces (SVIs): 1000 - Jumbo frames: 416 - Switch fundamentals o Layer 2, Routed Access (RIP, EIGRP Stub, OSPF - 1000 routes), PBR, PIM Stub Multicast (1000 routes)), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder, SSO - Automation o NETCONF, RESTCONF, gRPC, YANG, PnP Agent, ZTP/Open PnP, GuestShell (On-Box Python) - Telemetry and visibility o Model-driven telemetry, sampled NetFlow, SPAN, RSPAN - Advanced telemetry and visibility o Full Flexible NetFlow, EEM - Day-0 network bring-up automation o Network Plug-and-Play application, network settings, device credentials, LAN automation, host onboarding - SD-Access o Policy-based automation and assurance for wired and wireless - License should be provided for three years	عدد	1
2	25	موزع شبكة 48 منفذ (نوع 2)	(*)- 48 UPOE 12 Multigigabit(100M/1G/2.5G/5G/10G) + 36x 10M/100M/1G - 4x 10G/1G fixed uplinks - Total number of MAC addresses 32,000 - Total number of IPv4 routes (ARP plus learned routes) 32,000 (24,000 direct routes and 8000 indirect routes) - IPv6 routing entries: 16,000 - Multicast routing scale: 8,000 - QoS scale entries: 5,120 - ACL scale entries: 5,120 - Packet buffer: 16 MB buffer for 24 and 48 port Gigabit Ethernet models - FNF entries: 64,000 flow on 24- and 48-port Gigabit Ethernet models - DRAM: 8 GB - Flash: 16 GB - VLAN IDs: 4094 - Total Switched Virtual Interfaces (SVIs): 1000 - Jumbo frames: 416 - Switch fundamentals o Layer 2, Routed Access (RIP, EIGRP Stub, OSPF - 1000 routes), PBR, PIM Stub Multicast (1000 routes)), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder, SSO - Automation o NETCONF, RESTCONF, gRPC, YANG, PnP Agent, ZTP/Open PnP, GuestShell (On-Box Python) - Telemetry and visibility o Model-driven telemetry, sampled NetFlow, SPAN, RSPAN - Advanced telemetry and visibility o Full Flexible NetFlow, EEM - Day-0 network bring-up automation o Network Plug-and-Play application, network settings, device credentials, LAN automation, host onboarding - SD-Access o Policy-based automation and assurance for wired and wireless - License should be provided for three years	عدد	2
3	2	Voice Gateway Router توريد وتركيب وتشغيل موجه للمنفذ الصوتي	- Intel x86 CPU with up to 32 GB Memory. - Dynamic core allocation architecture that can leverage data plane cores for I/O and service plane per-user configuration - Up to 2 Gbps of IPsec traffic - SSL and crypto hardware acceleration - 6 built-in 10/100/1000/10G Ethernet ports for WAN or LAN - At least 2 Ethernet ports that can support Small Form-Factor Pluggable (SFP or SFP+) based connectivity in addition to 4 RJ-45 connections, enabling fiber or copper connectivity - Up to 32 GB DRAM for higher scale and performance - Integrated, on-board 8G flash - 16G M.2 USB for SD-WAN logging and additional storage on the router that can be upgraded to 32G M.2 USB and 600G M.2 NVMe - Following scale numbers: o 4000 Number of access control lists (ACLs) per system o 72000 Number of IPv4 access control entries (ACEs) per system o 1.6M Number of IPv4 routes o 16K Number of queues o 1.2M Number of Network Address Translation (NAT) sessions o 512K Number of firewall sessions - PoE ports can be added in both the Network Interface Module (NIM)/Service Module (SM) slots which will need a PoE Power supply - Up to 2 NIM slots and 2 PIM slots. - Three 256 Channel DSP NIM - One SM to NIM Module Adaptor - Includes one 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM - Includes one 1000BASE-T SFP transceiver module for Category 5 copper wire - Dual Power supplies for power supply redundancy - Router must have support for three years	عدد	3
4	10	Collaboration Servers توريد وتركيب وتشغيل خوادم للتواصل الموحد	(*)- The proposed HCI solution must be validated, tested, and certified to host and run Collaboration applications - The proposed HCI solution must be a factory shipped engineered & integrated system. All the components of HCI such as compute nodes, network switches, hypervisor OS, storage disks, management software should be factory installed and shipped ready for fast deployment. - The management of the HCI servers must be built-in the fabric switch - The HCI solution must support scaling hyperconverged node (compute + storage), or compute-only independent of each other under a single cluster. The compute-only node can be rack-mount or blade form factor - It must support the scaling of compute using compute-only nodes from one node to a quantity larger or equal to the number of HCI nodes - The solution must include 25Gbps network switches to connect HCI solution to our DC network. - The same network switches included with the HCI solution must be able to connect to existing storage fabric over FC. The vendor should provide the required network switches and required adapters to support these storage protocols. - The network switch should support QoS to streamline HCI network traffic to improve traffic filtering, segmentation and performance. - The HCI solution must support end-to-end installation of compute, network, storage, and QoS in automated installation steps. - The solution should have multiple vSwitches for network traffic segregation. Various network traffics such as management, storage, virtual machine, vMotion etc. HCI should be segregated on to independent virtual switch for improved traffic management and scaling. The procedure must be fully automated in the HCI installation. Any license required should be provided on day 1. - The HCI solution must support management of both rack & blade form factor of Hyperconverged nodes from the same console - The HCI solution should have Automated call home capability in the event of critical server failure or thresholds that are crossed, which could impact server performance or customer SLA. - The solution must be able to stay online in case of failures during updates or upgrades. - The solution should have a plugin in the Hypervisor for HCI management. Administrators should be able to view, provision, manage and monitor HCI solution from the hypervisor's management dashboard. - HCI solution must support fully distributed data architecture across all nodes in the cluster with no data locality - HCI solution must support multi-hypervisor - The storage controller must run in the user space - The HCI must support connecting to external 3rd party SAN/NAS storage into the HCI cluster for capacity expansion - The HCI solution should support Inline Deduplication and compression - Enabling deduplication and/or compression should not reduce the overall system performance. - The Solution should allow for taking clones of individual Virtual Machines for faster provisioning. Any additional software or license required should be provided on day 1. - The HCI storage should have integrated wizard to schedule snapshot for hourly/weekly/monthly snapshot policies. Any additional software or license should be provided on day 1. - The HCI solution should support the permanent presentation of external SAN storage to the HCI nodes - The solution should automatically rebalance data to maintain balanced utilization of storage across the HCI nodes. When storage capacity is scaled up or scaled out, the HCI modes must automatically redistribute data equally across all nodes equally without migrating VMs. - Virtualization software shall provide a Virtualization layer that sits directly on the bare metal server hardware with no dependence on a general purpose OS for greater reliability and security - Virtualization software shall allow heterogeneous support for guest Operating systems like Windows client, Windows Server, Linux (at least Red Hat, SUSE, Ubuntu, CentOS and Solaris x86) - Virtualization software shall have High Availability capabilities for the virtual machines in the sense that if in case one server fails all the Virtual machines running on that server shall be able to migrate to another physical server running same virtualization software. - The deduplication and compression must happen across all nodes in the cluster - Deduplication and compression must be supported on all flash and hybrid - The manufactures of the server hardware must have presence in Saudi Arabia - Compute-only node scaling must be supported on multiple hypervisor with license free - Each proposed HCI server out of the eight should have the following specs: o 2 x CPU Intel 6342 o 12 x 16GB “192GB” memory o 1 x cache drive SSD-EP 800GB o 6 x HDD drives 1.2TB o 4 x 25G network ports o Dual power supply o VMware Enterprise plus license – Three years support o HCI -DC license with three years subscription - Each management server out of the two servers should have the following specs: o 2 x CPU 4310 o 8 x 16 “128GB” memory o 3 x HDD drives 2.4TB o 1 x VIC 1467 with four ports 25G o 2 x M.2 SATA SSD 240G boot drive o Dual power supply o VMware vSphere standard license with three years support	عدد	4
5	2	- Servers Networking شبكة خوادم	(*)- 48 x 10/25-Gbps SFP28 ports and 6 x 40/100-Gbps QSFP28 port - Has a CPU with 6 Cores and 64GB System Memory - An integrated low-latency switching component that supports line-rate lossless line-rate, low-latency, line-rate 10/25/40/100 Gigabit Ethernet ports, Fibre Channel over Ethernet (FCoE), and Fibre Channel functions - The switch should provide full management and communication backbone for all Blade and Rack Mount servers - The switch should support Unified Fabric thereby consolidating all LAN/SAN traffic from servers within its domain - supporting deterministic, low-latency, line-rate 10 and 40 Gigabit Ethernet ports, switching capacity of 3.82 terabits per second (Tbps), and 200 Gbps of bandwidth between the interconnecting switch and the IOM per chassis, independent of packet size and enabled services. - Supports multiple traffic classes over a lossless Ethernet fabric from the server through the fabric interconnect - Provide direct connections to native Fibre Channel SANs - Allows all elements connected to the interconnects to participate in a single, highly available management domain - Decreases TCO by reducing the number of NICs, HBAs, switches, and cables required - Scales for up to 160 servers regardless of form factor (RackMount/Blade) without adding complexity by eliminating the need for dedicated chassis management and blade switches and by reducing the number of cables needed - Lossless Fabric: Provides a reliable, robust foundation for unifying LAN and SAN traffic on a single transport - Bandwidth Management helps enable consistent and coherent quality of service (QoS) throughout the system - Redundant hot-swappable fans and power supplies - Low-latency cut-through design: Provides predictable, consistent traffic latency regardless of packet size, traffic pattern, or enabled features - QOS Support: Layer 2 IEEE 802.1p (class of service [CoS]), 8 Queues per port, Per Port virtual output queueing, Cos Based ingress queuing, egress strict priority queue - Support for PFC, DCBX, and 802.1 Qaz - The switching component should support downlink ports of 1/10/25-Gbps Ethernet/FCoE8/16/32-Gbps Fibre Channel - The switching component should support priority flow control - The switching component should support different classes of service, enabling both lossless and classic Ethernet on the same fabric - The switching component should support per port licensing option to enable LAN or SAN protocols. - The system should come with its own switching platform that supports 3.82 switching capacity - The system should come with its own switching platform that provides 200 Gbps bandwidth per chassis - The fabric switches should support the below L2 features: o Ethernet switch mode o Fibre Channel switch mode o Layer 2 interconnect ports and 3K VLANs o IEEE 802.1Q VLAN encapsulation o Support Virtual SANs (VSANs) per interconnect o Rapid Per-VLAN Spanning Tree Plus RPVST+ o Internet Group Management Protocol (IGMP) Versions 1, 2, and 3 snooping o Link Aggregation Control Protocol (LACP): IEEE 802.3ad o Advanced EtherChannel hashing based on Layer 2, 3, and 4 information o Jumbo frames on all ports (up to 9216 bytes) o Pause frames (IEEE 802.3x) o FC/FCoE slow drain detection and recovery o Port security - Supports up to 2000 VIF (Virtual Interfaces) - It should support the direct connection to FCoE enabled storage arrays - It should support the direct connection to FC storage arrays - It should support the direct connection to NAS based devices - Should include support for FC Port Trunking - Supports local SPAN for traffic flows monitoring and troubleshooting simplification	عدد	5
6	200	Management IP Phones هواتف فيديو	(*)- Ergonomic design o The phone offers an easy-to-use interface and provides a traditional telephony-like user experience - Graphical display - Model Number ; 8865 with Camera. o The 800 × 480, 24-bit color, 5-in. WVGA display provides scrollable access to calling features and text-based XML applications - Audio o Automatic Gain Control o Comfort Noise Generation o Silence Suppression/Voice Activity Detection o Acoustic Echo Cancellation (AEC) o Dynamic Noise Reduction - Audio codec support o G.711 a-law and mu-law, G.722, G.729a/b, Internet Low Bitrate Codec (iLBC), and Internet Speech Audio Codec (iSAC), G.722.1, G.772.2, OPUS - Video o 720p HD video (encode and decode) o H.264 and Application Visibility and Control (AVC) - Handset o The handset is a standard wideband-capable audio handset (connects through an RJ-9 port) o The standard coiled cord has a custom end for concealed cable routing beneath the phone (cord length is approximately 21 in. [55 cm] coiled and up to 72 in. (183 cm) extended) o The handset is Hearing Aid-Compatible (HAC) and meets Federal Communications Commission (FCC) loudness requirements for the Americans with Disabilities Act (ADA). You can achieve Section 508 loudness requirements by using industry-standard inline handset amplifiers such as Walker Equipment W-10 or CE-100 amplifiers. The dial pad is also ADA-compliant - Speakerphone o The full-duplex speakerphone gives you flexibility in placing and receiving calls with hands free. For added security, the audible dual tone multifrequency (DTMF) tones are masked when the speakerphone mode is used. - Analog headset o The analog headset jack is a standard wideband-capable RJ-9 audio port - AUX port o You can use an auxiliary port to support electronic hook switch control with a third-party headset connected to it - External audio ports o The phone has a 3.5-mm stereo line in/out jack (for optional external headset, speakers, or headphones) - USB o Two USB ports enhance the usability of call handling by enabling wired or wireless headsets, in addition to providing charging capability to mobile devices such as smartphones or tablets o A side USB port provides up to 500mA power output at 5V or 2.5W  A back USB (in yellow) port provides 500mA power output and is upgradable to support up to 2.1A power output at 5V or 10.5W - Ethernet switch o An internal 2-port Ethernet switch allows for a direct connection to a 10/100/1000BASE-T Ethernet network (IEEE 802.3i/802.3u/802.3ab) through an RJ-45 interface with single LAN connectivity for both the phone and a co-located PC o The system administrator can designate separate VLANs (IEEE 802.1Q) for the PC and phone, providing improved security and reliability of voice and data traffic - Bluetooth o The phone offers Bluetooth 4.1 LE, Enhanced Data Rate (EDR) Class 1 technology (up to 66-ft [20m] range) o Hands-Free Profile (HFP) is supported for untethered headset connections and voice communications o Phone Book Access Profile (PBAP) is supported for phone book object exchange between devices - Wi-Fi client o As an alternative to wired Ethernet, the 8865 supports a Wi-Fi radio with integrated antenna enabling connectivity to a Wi-Fi access-point infrastructure, thereby saving on the labor costs of pulling Ethernet cables to every work location. Complete Wi-Fi specifications are included in Table 3 later in this document - Keys o The phone has the following keys:  Line keys  Soft keys  Back and release keys  Four-way navigation and select keys  Hold/Resume, Transfer, and Conference keys  Messaging, Application, and Directory keys  Standard keypad  Volume-control toggle key  Speakerphone, Headset, and Mute keys - Backlit indicator o The phone supports backlit indicators for the audio path keys (Handset, Headset, and Speakerphone), select key, line keys, and message waiting - Replaceable bezel o The phone includes a black bezel; an optional silver bezel is also orderable separately - Dual-position foot stand o The display is easy-to-view and the buttons and keys are easy-to-use. The two-position foot stand supports viewing angles of 35 and 50 degrees; you can remove the foot stand for wall mounting, with mounting holes located on the base of the phone - Wall-mountable o You can install the phone on a wall using an optional wall-mount kit (orderable separately) - Key Expansion Module (KEM) o The phone supports up to three KEMs to expand from 5- to 113-line buttons. You have the convenience of many speed dials or programmable features - Physical security o The phone is compatible with the Kensington Security Slot (K-Slot) antitheft system - IEEE Power over Ethernet (PoE) o IEEE Power over Ethernet class 4 is supported. The phone is compatible with IEEE 802.3af, 802.3at and UPOE switch blades and supports both Discovery Protocol and Link Layer Discovery Protocol - Power over Ethernet (LLDP-PoE) - IP Phone Power Cube 4 o This optional power cube is used as an AC-to-DC (48V) power supply for non-PoE deployments. Use of the power cube 4 also requires the use of one of the corresponding AC country cords - Unified Communications Manager o 8.5.1 (non-secured mode only) o 8.6.2 o 9.1.2 o 10.5.2 o 11.0 and later	عدد	6
7	600	Mid-Range IP Phones هواتف صوتية	(*)- Ergonomic design o The phone offers an easy-to-use interface and provides a traditional telephony-like user experience - Graphic display - Model Number 8811 without camera. o The 5-in., 800 × 480 resolution, grayscale display provides scrollable access to calling features and text-based XML applications - Handset o The handset is a standard wideband-capable audio handset (connects through an RJ-9 port). o The standard coiled cord has a custom end for concealed cable routing beneath the phone (cord length is approximately 21 in. [55 cm] coiled and up to 72 in. (183 cm) extended). o The handset is hearing aid-compatible (HAC) and meets Federal Communications Commission (FCC) loudness requirements for the Americans with Disabilities Act (ADA). You can achieve Section 508 loudness requirements using industry-standard inline handset amplifiers such as Walker Equipment W-10 or CE-100 amplifiers. The dial pad is also ADA-compliant. - Speaker phone o The full-duplex speakerphone gives you flexibility in placing and receiving calls with hands free. For added security, the audible Dual Tone Multifrequency (DTMF) tones are masked when the speakerphone mode is used. - Analog headset o The analog headset jack is a standard wideband-capable RJ-9 audio port - AUX port o You can use an auxiliary port to support electronic hook switch control with a third-party headset connected to it. - Ethernet switch o An internal 2-port Ethernet switch allows for a direct connection to a 10/100/1000BASE-T Ethernet network (IEEE 802.3i/802.3u/802.3ab) through an RJ-45 interface with single LAN connectivity for both the phone and a co-located PC. o The system administrator can designate separate VLANs (IEEE 802.1Q) for the PC and phone, providing improved security and reliability of voice and data traffic. - Keys o The phone has the following keys:  Line keys  Soft keys  Back and release keys  Four-way navigation and select keys  Hold/Resume, Transfer, and Conference keys  Messaging, Application, and Directory keys  Standard keypad  Volume-control toggle key  Speakerphone, headset, and mute keys - Backlit Indicator o The phone supports backlit indicators for the audio path keys (handset, headset, and speakerphone), select key, line keys, and message waiting - Replaceable bezel o The phone includes a black bezel; an optional silver bezel is also available separately. - Dual-position foot stand o The display is easy-to-view and the buttons and keys are easy-to-use. The two-position foot stand supports viewing angles of 35 and 50 degrees; you can remove the foot stand for wall mounting, with mounting holes located on the base of the phone - Wall-mountable o You can install the phone on a wall using an optional wall-mount kit (available separately). - Physical security o The phone is compatible with the Kensington Security Slot (K-Slot) antitheft system. - IEEE Power over Ethernet (PoE) o IEEE Power over Ethernet class 2. The phone is compatible with both IEEE 802.3af and 802.3at switch blades and supports both Discovery Protocol and Link Layer Discovery Protocol - Power over Ethernet (LLDP-PoE). - IP Phone Power Cube 4 o This optional power cube is used as an AC-to-DC (48V) power supply for non-PoE deployments. Use of the power cube 4 also requires the use of one of the corresponding AC country cords. - Unified Communications Manager o 8.5.1 (Non-secured mode Only) o 8.6.2 o 9.1.2 o 10.5.2 o 11.0 and later	عدد	7
8	30	موصلات ضوئية 25G	(*)- 25GBASE-SR SFP Module	عدد	8
9	100	موصلات ضوئية 10G	(*)- 10GBASE-SR SFP Module, Enterprise-Class	عدد	9

9 بند

جدول 2 الخدمات والمخرجات - تقنية معلومات

البند	الكمية	وصف البند	المواصفات	وحدة القياس	الرقم التسلسلي
1	2	رخصة لموجة الاتصال الصوتي Voice gateway router license	(*)- On-prem Advantage license for three years - Required 2G aggregated throughput	عدد	1
2	330	Session Border Control licensesرخص لوحدة التحكم في جلسات بروتوكول بدء جلسات الاتصالات مدة 36 شهر	- Provides High Availability - Facilitate PSTN interconnect using Internet service provider SIP trunks - Support for SIP to SIP protocol and signaling interworking - Support RTP, RTCP and Binary Flow Control Protocol passthrough - Support Media flow-through and Media flow-around modes - SIP delayed-offer to SIP early-offer interworking for audio or video calls - Signaling transport mode o Transport Control Protocol (TCP) o Transport Layer Security (TLS) o User Datagram Protocol (UDP) o TCP, TLS and UDP interworking - Codec support o OPUS low bitrate 6 kbps to very high-quality 510 kbps o G.711 mu-law and a-law o G.722 o G.723ar53, G.723ar63, G.723r53, and G.723r63 o G.726r16, G.726r24, and G.726r32 o G.728 o G.729, G.729A, G.729B, and G.729AB o Internet Low Bitrate Codec (iLBC) 13330 or 15200 bps o Internet Speech Audio Code (iSAC) 10 to 32 kbps o AAC-LD MP4A-LATM o Mid-call codec renegotiation and preservation o Narrowband Adaptive Multi-rate (AMR-NB) 4750-12200 bps - Transcoding between any two different families of codecs from the following list: o G.711 a-law and mu-law o G.729, G.729A, G.729B, and G.729AB o iLBC o G.722 o OPUS (PVDM4 modules only) o Mid-call transcoder insert and drop - Security o Rogue SIP invite and rogue RTP packet detection with alerting o Configurable RTP port range o IP security (IPsec) o SRTP flow-through o Transport Layer Security (TLS) version 1.2, with exclusivity o SRTP-to-RTP and STRP-to-SRTP interworking with Next-Generation Encryption (NGE) cipher suites o Configurable SIP listening port o Disable unused transport mechanisms o SIP registration and digest authentication support o Various mechanisms for control of RTP and UDP packet flooding o Voice security policy application integration (via HTTP API) o Peer whitelisting /IP Trusted List o Silent discard of SIP messages from untrusted peers o Compatible with IOS Zone Based Firewall - License for three years	عدد	2
3	10	منصة الإدارة والتشغيل آلي Management - and Automation Platform	(*)- Infrastructure lifecycle management platform that delivers simplified configuration, deployment, maintenance, and support. - Full lifecycle management of distributed connected servers and third-party storage across data centers, remote sites, branch offices, and edge environments - Unified monitoring and management Increasing scale across data centers and remote locations without additional complexity - Use a single dashboard to monitor the managed systems - Configuration, provisioning, and installation including: o Policy-based profiles for deployment, configuration, and the creation of multiple server profiles consistently deploy and configure servers, eliminating configuration errors. o Clone profiles to quickly provision the servers - Orchestration and Workflow Designer including framework to create and execute complex workflows, a library of tasks that you can use to compile a workflow, and Workflow Designer includes a drag-and-drop UI to help you create new workflows to manage devices. - Inventory information, status, and capacity planning including: o Display and report inventory information for servers o Use global search to rapidly identify systems based on names, identifiers, tags, and other information. o Monitor the server alerts and health status across data centers and remote locations. o Track and manage firmware versions across connected servers - Enhanced support and end-customer experience including: o Raise service requests and Return Materials Authorizations (RMA) automatically and proactively authorize the RMA o Get centralized alerts about failure notifications. o Automate the generation, forwarding, and analysis of technical support files to the Technical Assistance Center (TAC) to accelerate the troubleshooting process - Provides a RESTful API to manage the connected systems across multiple data centers - Supports the OpenAPI Specification (OAS) to provide full programmability and deep integrations systems to efficiently automate IT infrastructure from the data center to edge locations - Support using Python and PowerShell SDKs to make integrations with Ansible, Chef, Puppet, and other DevOps and IT Operations Management (ITOM) tools. - Support ServiceNow Integrations to provide inventory and alerts to the IT Service Management platform to show inventory and configuration details, elevating the ITSM experience. - Security Advisories alert users about any endpoint devices impacted by vulnerability, providing the latest information on severity, impacted products, and available workarounds. - Support hardware compatibility list to Evaluate and mitigate the impact of service issues from running non-validated combinations of firmware, server model, processor, adapters, operating system, and driver versions. - Flexible deployment options as SaaS or on-prem Solution - Support “Recommendation engine” leveraging the telemetry information fed from the connected systems and server to proactively review customer metadata to identify potential issues in customers’ environments to prevent problems and improve system uptime in the future. - Customizable dashboard allowing the operation team to focus on the information and tasks that are relevant to their needs - Support Cross-launch capabilities for virtual Keyboard, Video, Mouse (KVM) sessions. - Support Server Actions, Details, Graphical Server views - Support Role Based Access Control (RBAC) - Support SAML Single Sign-on (SSO) - Support LDAP/AD integration - Support log collection - Support Storage automation - Support Virtualization automation - Support integration with external syslog server	عدد	3
4	1000	تفعيل اجتماعات للاتصالات المرئية للتعليم العالي Meetings for Higher Education مدة 36 شهر	(*)- Meetings service o Meetings Service for video and web conferencing with a capacity of 25 and/or 200 attendees per session for Named User. For the Ports offer, the customer can have as many attendees as ports as the subscriber owns, up to 1,000. For Active User and Employee Count, the meeting capacity is 1,000 - Training Service o Training Service for video and web conferencing with a capacity of 30 and/or 200 attendees per session. - Events Service o Events Service for video and web conferencing with a capacity of 100, 500, 1,000 and/or 3,000 - Support Service o Support Service for video and web conferencing with capacity of 5 attendees per session. - Teams meetings o Ability to Host or join Meetings natively from Teams with common meeting experiences and controls no matter how participants join. o Note: calendar service must be enabled.	عدد	4
5	1	نظام إدارة البيئة الافتراضية للخادم – Compute virtualization manager	نظام إدارة البيئة الافتراضية للخادم – Compute virtualization manager	عدد	5
6	1	بند التوريد و التركيب وتشغيل البنيه التحتيه	بند التوريد و التركيب وتشغيل البنيه التحتيه	عدد	6