منافسة عامة
قيد التنفيذ
توريد وتركيب أجهزة قياس مرجعية للمركز الوطني للقياس والمعايرة
الهيئة السعودية للمواصفات والمقاييس والجودة
رقم المنافسة
200939249934
المعرّف
#111066
| التاريخ | ميلادي | هجري |
|---|---|---|
| تاريخ النشر | 2020/09/30 11:13 | — |
| آخر موعد للاستفسارات | 2020/10/14 | 1442-02-27 |
| آخر موعد تقديم العروض | 2020/10/15 23:50 | 1442-02-28 |
| موعد فتح العروض | 2020/10/18 10:00 | 1442-03-01 |
| موعد فحص العروض | — | — |
| التاريخ المتوقع للترسية | — | — |
| تاريخ بدء الأعمال | — | — |
| تاريخ خطاب تأكيد المشاركة | — | — |
| بداية إرسال الأسئلة | — | — |
موقع التنفيذ
مجال التصنيف
جدول 1 جدول الكميات والاسعار
| الاسم | البند | الرقم | الكمية | الوحدة | رقم البند | وصف البند | منتج من القائمة الإلزامية | ملف البند |
|---|---|---|---|---|---|---|---|---|
| جهاز استخلاص العينات باستخدام التفريغ Vacuum manifolds for reproducible SPE applications | جهاز استخلاص العينات باستخدام التفريغ Vacuum manifolds for reproducible SPE applications | 1 | 1 | عدد | 1 | Vacuum manifold complete, for up to 16 LV columns Included: vacuum pump | 0 | جدول الكميات والاسعار توريد وتركيب أجهزة قياس مرجعية للمركز الوطني للقياس والمعايرة.pdf 775 KB |
| جهاز هضم العينات باستخدام اشعه الميكروويف Microwave Digestion System | جهاز هضم العينات باستخدام اشعه الميكروويف Microwave Digestion System | 2 | 1 | عدد | 2 | 208-240VAC, 50/60Hz, 12A, CSA, and UL compliant oven. • • Separated controller module with powerful & friendly user interface. Ethernet or Bluetooth connection. P.N. QL-101-501. • • Preloaded EPA 3015, 3051 3052 and other digestion methods. • • Unlimited digestion recipes can be developed and stored. • • Software allows users to edit, save and run methods. Printouts are also possible. • • Ports to transfer methods or update software with data storage capacity of about 6 GB. • • Option of Q-Block pre- and post- digestion treatment of samples in microwave digestion vessel liner itself to minimise contamination, concentrate samples, boric acid treatment for excess HF acid or evaporate excess acids. • • Magnetron power cut off in case of over limit pressure release. • • Auto shut-off function for system shut down if full power is applied over a specified time to prevent runaway reactions. • • Compatible with Questron eVHP or LVHT vessel sets. Total 12 eVHP vessels. • Min recommended vessels used – 04. • Each Vessel volume 100mL. • Recommended sample quantity 12-50mL, depending on sample. • Design temperature 300°C. • Maximum operating temperature 260°C. • Normal operating temperature 230°C. • Design pressure ~ 165 bar / 2400 psi. • Maximum pressure ~ 83 bar / 1200 psi. • Operating pressure control at ~ 42 bar / 610 psi (Op Guard limit). • Includes vessel carousel. • Includes vessel loading station. • Every vessel is monitored individually for temperature and pressure. • Vessel over-pressure management system has controlled release of over pressure for full operational temperature range. Each vessel is individually tested for 600 psi (40 bar) pressure | 0 | — |
| جهاز هزاز عينات مع مساحة سطح كبيره تستوعب 15-20 كجم Shaker Digital Orbital 15 – 20 Kg | جهاز هزاز عينات مع مساحة سطح كبيره تستوعب 15-20 كجم Shaker Digital Orbital 15 – 20 Kg | 3 | 1 | عدد | 3 | Infinitely variable speed control from 0-300 rpm Digital display Orbital diameter 30 mm Ideal for all lying vessels, e.g. separating funnels Continuous operation (endless) even under extreme loads Timer function Type of movement orbital Shaking stroke 30 mm Permissible shaking weight (incl. attachment) 15 kg Motor rating input 70 W Motor rating output 19 W Permissible ON time 100 % Speed range 0 - 300 rpm Speed display 7 segment LED Timer yes Timer display scale Time setting range 1 - 55 min Operating mode timer and continuous operation Dimensions (W x H x D) 505 x 120 x 585 mm Weight 26 kg Permissible ambient temperature 5 - 50 °C Permissible relative humidity 80 % Protection class according to DIN EN 60529 IP 21 RS 232 interface yes USB interface yes Voltage 230 / 115 / 100 V Frequency 50/60 Hz Power input 74 W Integrated USB and RS 232 interface | 0 | — |
| جهاز تحكم بدرجة الحرارة مع جميع الملحقات (حمام مائي) Immersion Circulator Temperature Control System (water bath) | جهاز تحكم بدرجة الحرارة مع جميع الملحقات (حمام مائي) Immersion Circulator Temperature Control System (water bath) | 4 | 1 | عدد | 4 | package includes IC control immersion circulator IB 20 pro stainless steel bath (size L) PT 100.30 temperature sensor CC1 cooling coil (already included in IC control device) CL.IC large cover BS.IC small bridge Appliance type Immersion thermostat Class designation acc. DIN 12876 III Identification according to DIN 12876 FL Heat output 2500 W Working temperature room temp. +10K @1000rpm - 250 °C Operating temperature min. (with external cooling) -20 °C Temperature display yes Temperature control PT 100 Working temperature sensor PT 100 Safety temperature sensor PT1000 Working temperature display TFT Safety temperature display TFT Temperature stability DIN 12876 0.01 ±K Connection for ext. temperature sensor PT 100 Display resolution 0.01 K Display for operation with ext. sensor yes Set temperature resolution 0.1 ±K Warning function optical yes Warning function acoustic yes Warning function excess temperature yes Adjustable safety circuit 0 - 260 °C Sub-level protection yes Over-level protection yes Pump type Pressure- / suction pump Pump capacity adjustable yes Pump pressure max. (0 liters discharge flow) 0.7 bar Pressure pump (suction side) (0 liter flow) 0.4 bar Flow rate max. (0 bar back pressure) 26 l/min Pump connection M16x1 Cooling coil connection NW 8 Bath depth min. 150 mm Calibration option yes Appliance fastener Bridge Range of universal clamp 280 - 375 mm Technical data complies with the standard DIN 12876 Permissible ON time 100 % Dimensions (W x H x D) 285 x 313 x 291 mm Weight 16.56 kg Permissible ambient temperature 5 - 40 °C Permissible relative humidity 80 % Protection class according to DIN EN 60529 IP 21 RS 232 interface yes USB interface yes Voltage 230 / 100 - 115 V Frequency 50/60 Hz Power input 2650 W total: 354 x 641 x 359 mm bath opening: 255 x 262 mm * max. Bath opening: 292 x 278 mm ** Immersion depth. 95 mm–135 mm | 0 | — |
| مبرد لجهاز تحكم بدرجة الحرارة (مبرد حمام مائي) Recirculating Chiller for Immersion Circulator | مبرد لجهاز تحكم بدرجة الحرارة (مبرد حمام مائي) Recirculating Chiller for Immersion Circulator | 5 | 1 | عدد | 5 | Powerful, compact and energy-efficient circulating chiller for cooling applications up to -30 °C. The on-demand and speed-controlled compressor, operated with natural refrigerant, achieves a cooling capacity of 800 W at a minimum energy consumption. highly efficient speed-controlled cooling unit with a cooling capacity of 800 W (@20 °C) natural refrigerant R290 speed-controlled PEEK pump: (0.5 bar; 21 l/min) digital level indicator big LED-Display optical and acoustic warning functions easy-to-clean stainless steel mesh filter high quality insulated 4 l bath reservoir(minimum 1.5 l) Interfaces: RS 232 and USB for controlling and monitoring the devices via labworldsoft® and to update the software online Calibrateable internal temperature sensor (3 point) | 0 | — |
| جهاز نظام تنقية المياه للمياه النقية للغاية Water Purification System for Ultrapure Water | جهاز نظام تنقية المياه للمياه النقية للغاية Water Purification System for Ultrapure Water | 6 | 1 | عدد | 6 | Water Purification System AUTWOMATIC PLUS 10 L with 50 Liters Tank includes all the elements of the system: one kit of consumables (Pretreatment Cartridges Ref. PCK501, Deionization Cartridges Ref. PCK504, Reverse Osmosis Membrane Ref. ROA3004, Sanitization Kit Ref. PCK516 and PCK517), 50 Liters Tank Ref. 70230 and accessories for the installation. Output: Pure water Type II (analytical grade) according ASTM D1193 and Osmotized water. Input: Tap water (Hardness < 30 ºF) Production: 10 ltr./h / with 50 liter tank. Purification process control: By microprocessor Installation requirements: 110- 220V AC Measures and weight: - Equipment 60 x36 x 49 cm (HxWxD) / 35 kg - External pretreatment 55x24x16 cm (HxWxD) - Tank 40 x 80 cm (diam x H) | 0 | — |
| جهاز منضدة لقياس درجة الحموضة pH Meter Benctop | جهاز منضدة لقياس درجة الحموضة pH Meter Benctop | 7 | 1 | عدد | 7 | pH meter Benchtop Laboratory Research Grade Two Channel Benchtop pH/mV/ISE Meter Capacitive Touch Keypad ISE Mode with Incremental Methods cal check | 0 | — |
| جهاز تبخير عينات بالنيتروجين للتحضير مع سخان Nitrogen Evaporator Complete System for sample derivatization | جهاز تبخير عينات بالنيتروجين للتحضير مع سخان Nitrogen Evaporator Complete System for sample derivatization | 8 | 1 | عدد | 8 | This precision-machined gas manifold performs simultaneous or separate delivery of nonreactive pressurized gas to samples. Perform derivatization and other small-scale reactions reliably and with ease using the Heating and Stirring module. This module has dry block heaters that provide uniform, stable heating between 10–200 °C. | 0 | — |
| منظم الضغط أحادي المرحلة Dual Stage High Pressure Cartridge Regulator | منظم الضغط أحادي المرحلة Dual Stage High Pressure Cartridge Regulator | 9 | 1 | عدد | 9 | Gas Type All, Oxygen Oxygen use Ok with brass and stainless steel Weight 1.1 grams Body material Chrome Plated Brass, Stainless Steel Helium Leak Rate at Max Pressure 1 * 10-8 mbar l/sec (He) Outlet connection 1/4" NPT Inlet connection 1/4" NPT Upper Operating Temperature Limit 60 Celsius Lower Operating Temperature Limit -40 Celsius Technology Diaphragm + Cartridge Nominal flow 1, 2, 10, 20, 30 Nm3/h (N2) Outlet Pressure 0 -1.5 bar Inlet Pressure 200 / 300 bar Purity Level 6 Diaphragm material Hastelloy | 0 | — |
| منظم مع وحدة تحكم بالغازات Semi-Automatic switchover manifold board with integrated outlet pressure regulator | منظم مع وحدة تحكم بالغازات Semi-Automatic switchover manifold board with integrated outlet pressure regulator | 10 | 3 | عدد | 10 | Inlet connection 1/4 NPT Outlet connection 1/4 NPT O-ring material EPDM, FPM Outlet Pressure 1.5, 5.5, 10 bar Inlet Pressure 200,300 bar Helium Leak Rate at Max Pressure 10-8 mbar l/sec (He) Nominal flow 10 Nm3/h (N2) Lower Operating Temperature Limit -20 Celsius Upper Operating Temperature Limit 60 Celsius Oxygen use Brass only with inlet pressure 200 bar Gauge connection 1/4 NPT | 0 | — |
| قاعدة تثبيت لأسطوانات الغاز الكبيرة | قاعدة تثبيت لأسطوانات الغاز الكبيرة | 11 | 3 | عدد | 13 | توريد وتركيب قاعدة من الحديد المطلي بدهان حراري على ان يكون بمقاسات التالية: 125*65 سم على ان تتقوم بتثبيت 6 أسطوانات بشكل مزدوج ويوجد مكان لتخزين الأسطوانات الفارغة | 0 | — |
| قاعدة تثبيت لأسطوانات الغاز الصغيرة | قاعدة تثبيت لأسطوانات الغاز الصغيرة | 12 | 20 | عدد | 14 | توريد وتركيب قاعدة من الحديد المطلي بدهان حراري تقوم بتثبيت أسطوانة صغيرة مفردة بإرتفاع 35 سم حيث ان قطر الأسطوانة 15 سم | 0 | — |
| قاعدة تثبيت لأسطوانات الغاز الصغيرة | قاعدة تثبيت لأسطوانات الغاز الصغيرة | 13 | 3 | عدد | 15 | توريد وتركيب قاعدة من الحديد المطلي بدهان حراري تقوم بتثبيت 4 أسطوانات صغيرة بإرتفاع 35 سم حيث ان قطر الأسطوانة 15 سم | 0 | — |
13 بند
جدول 2 جدول الكميات والاسعار (مواد )
| الاسم | البند | الرقم | الكمية | الوحدة | رقم البند | وصف البند | منتج من القائمة الإلزامية | ملف البند |
|---|---|---|---|---|---|---|---|---|
| مواد كيميائية | Sulphuric Acid (H2SO4 ) | 1 | 1 | عدد | 11 | Sulphuric Acid (H2SO4 ) | 0 | جدول الكميات والاسعار توريد وتركيب أجهزة قياس مرجعية للمركز الوطني للقياس والمعايرة.pdf 775 KB |
| مواد كيميائية | di-sodium hydrogen phosphate 500 gm | 2 | 2 | عدد | 11 | di-sodium hydrogen phosphate 500 gm | 0 | — |
| مواد كيميائية | Potassium Chloride Extra Pure 500 gm | 3 | 2 | عدد | 11 | Potassium Chloride Extra Pure 500 gm | 0 | — |
| مواد كيميائية | di-sodium tetra borate 250 gm | 4 | 1 | عدد | 11 | di-sodium tetra borate 250 gm | 0 | — |
| مواد كيميائية | NH3 Ammonia Solution 1L | 5 | 1 | عدد | 11 | NH3 Ammonia Solution 1L | 0 | — |
| مواد كيميائية | Hydranal Hydrate Composite 5 coulometric | 6 | 1 | عدد | 11 | Hydranal Hydrate Composite 5 coulometric | 0 | — |
| مواد كيميائية | AGAR | 7 | 1 | عدد | 11 | AGAR | 0 | — |
| مواد استهلاكية | pH electrode Metler InLab® Routine & Routine Pro pH electrodes | 8 | 1 | عدد | 12 | pH electrode Metler InLab® Routine & Routine Pro pH electrodes | 0 | — |
| مواد استهلاكية | 18mm Headspace Vials & Closures 20ml volume for GC (100/pk) ( Included Septa + Magnetic Screw Cap) | 9 | 20 | packets | 12 | 18mm Headspace Vials & Closures 20ml volume for GC (100/pk) ( Included Septa + Magnetic Screw Cap) | 0 | — |
| مواد استهلاكية | Magnetic Screw Cap with PTFE/Silicone Septa, 18 mm Diameter, SPME 0.045" (100/pk) | 10 | 20 | packets | 12 | Magnetic Screw Cap with PTFE/Silicone Septa, 18 mm Diameter, SPME 0.045" (100/pk) | 0 | — |
| مواد استهلاكية | Septa for headspace Vials PTFE/Blue Silicone, 3 mm thickness (1000/pk) | 11 | 3 | packets | 12 | Septa for headspace Vials PTFE/Blue Silicone, 3 mm thickness (1000/pk) | 0 | — |
| مواد استهلاكية | LC column SN 10292986 Thermo Fisher | 12 | 2 | عدد | 12 | LC column SN 10292986 Thermo Fisher | 0 | — |
| مواد استهلاكية | Pipette tips disposable 5ml, 2ml, 1 ml | 13 | 10 | packets | 12 | Pipette tips disposable 5ml, 2ml, 1 ml | 0 | — |
| مواد استهلاكية | HDPE plastic bottles 100 ml with screw caps narrow neck | 14 | 200 | pieces | 12 | HDPE plastic bottles 100 ml with screw caps narrow neck | 0 | — |
| مواد استهلاكية | HDPE plastic bottles 250 ml with screw caps narrow neck | 15 | 50 | pieces | 12 | HDPE plastic bottles 250 ml with screw caps narrow neck | 0 | — |
| مواد استهلاكية | HDPE plastic bottles 500 ml with screw cap narrow neck | 16 | 600 | pieces | 12 | HDPE plastic bottles 500 ml with screw cap narrow neck | 0 | — |
| مواد استهلاكية | Pyrex glass reagent bottles graduated 250ml | 17 | 10 | pieces | 12 | Pyrex glass reagent bottles graduated 250ml | 0 | — |
| مواد استهلاكية | Pyrex glass reagent bottles graduated 500 ml | 18 | 10 | pieces | 12 | Pyrex glass reagent bottles graduated 500 ml | 0 | — |
| مواد استهلاكية | Pyrex glass reagent bottles graduated 1000 ml | 19 | 10 | pieces | 12 | Pyrex glass reagent bottles graduated 1000 ml | 0 | — |
19 بند
كراسة الشروط الرئيسية
كراسة الشروط والمواصفات وملاحق المنافسة
602 KB
تم التحميل
2020/111066/main_booklet_كراسة_الشروط.html
المستندات الداعمة (2 ملف)
كراسة شروط ومواصفات توريد وتركيب أجهزة قياس مرجعية للمركز الوطني للقياس والمعايرة.pdf
2.5 MB
تم التحميل
2020/111066/idd_421E7015-383D-C013-8699-74DE05600000_كراسة_شروط_ومواصفات_توريد_وتركيب_أجهزة_قياس_مرجعية_للمركز_الوطني_للقياس_والمعايرة.pdf
الشروط والأحكام لآلية التفضيل السعري للمنتج الوطني 002.pdf
567 KB
تم التحميل
2020/111066/idd_94C25FB3-74B0-C5F6-8427-74CEE3F00000_الشروط_والأحكام_لآلية_التفضيل_السعري_للمنتج_الوطني_002.pdf
لم يتم ترسية هذه المنافسة بعد
لا توجد بيانات للمحتوى المحلي
معايير التقييم
لا توجد معايير تقييم
أخبار المنافسة
لا توجد أخبار